Discover the first-class 1 inch heating circuit distributor for underfloor heating made of high-quality stainless steel. With its compact design, excellent sound insulation and effortless installation, this distributor is particularly impressive in conjunction with underfloor heating and cooling.

The integrated flow meters enable precise settings of the water quantities, which ensures optimal hydraulic balancing for each individual circuit. These flow meters are manufactured in Germany and guarantee the highest quality.

Thanks to the offset arrangement of the flow and return, the distributor is ideal for easy pipe installation. Every heating circuit distributor is carefully tested for function and pressure by the manufacturer before leaving the factory to ensure the highest level of safety.

This distributor can be used for both manual control and electronic individual room control with appropriate actuators and room thermostats. Our actuators with the M30 x 1.5 adaptation are perfectly tailored to this distributor.

Optimize your underfloor heating with the premium heating circuit distributor for efficient and comfortable room temperature control. Discover quality and reliability for your heating system!

✓ Robust profile pipe distributor made of stainless steel (not welded) in accordance with DIN EN 1264-4
✓ Easy connection to the heat generator thanks to the 1" internal thread (1" external thread transition nipple included in delivery)
✓ Adjustable flow meter (2.5 l/min) in the flow with shut-off valve
✓ Return bar with integrated valves and manual adjustment cap

Product features:

✓ Robust profile pipe distributor made of stainless steel (not welded) in accordance with DIN EN 1264-4
✓ Easy connection to the heat generator thanks to the 1" internal thread (1" external thread transition nipple included in delivery)
✓ Adjustable flow meter (2.5 l/min) in the flow with shut-off valve
✓ Return bar with integrated valves and manual adjustment cap

Accessories included:

• Soundproof steel consoles
• 2 pieces of transition nipples 1" external thread
• 2 distributor holders
• 2 ball valves 1"

For each heating circuit:

• 1 flow indicator
• Valve inserts 30 x 1.5 mm (compatible with Environ, Heimeier, Salus, Oventrop and more)
• Pipe connections for Eurocone 3/4"
• Max. operating pressure: 5 bar


Technical data fixed value rule set:

This fixed value control set is used to constantly maintain the flow temperature you have set for underfloor heating systems and radiators.
This is installed in front of the heating circuit distributor and uses the thermostat head to ensure that the preset temperature is maintained exactly.

Ideal for subsequently installed underfloor heating circuits.

Technical data fixed value rule set:

▸ Adjustable temperature: 20-70°C
▸ Pump length: 130mm
▸ Maximum medium temperature at the inlet: 110 °C
▸ Minimum medium temperature at the inlet: 7 °C
▸ Max. pressure: 10 bar
▸ Connections: 1” male
▸ Brass: CW 617N O - Nickel plated
▸ Seals: EPDM 70 SH
▸ Axis dimension feed / return secondary: 210mm
▸ Temperature display: 0-80°C

✓ with integrated check valve

Technical data Environ EcoStar 25/6 high-efficiency pump:

▸ Delivery height max: 6m
▸ Flow rate max: 3.6m³/h
▸ Temperature range: -20°C to +110°C
▸ Power consumption: 3W-43W
▸ Operating pressure: max. 10 bar
▸ El. connection: 230V/50HZ
▸ Supply voltage: 220~240V, 50/60Hz
▸ Protection level: IP44
▸ Insulation class: H
▸ EMC standard: EN61000-6-1 and EN61000-6-3


A notice:

In order to be able to integrate this product into the house installation, an intervention in the 230-volt network must be made.
Work on the 230-volt network may only be carried out by a qualified electrician (according to VDE 0100).