The ECOMIX ENH001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with a built-in brass three-way mixer and an ESBE ARA561 electric actuator.
A Wilo Para 25/6 high-efficiency pump is installed. The flow and return can easily be reversed from right to left. In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C). The sophisticated thermal insulation made of EPP ensures an optimal climate inside the insulation so that no heat build-up occurs. If the pump group is installed individually, a wall bracket can be screwed onto the shut-off valves (not included in delivery). Maintenance or replacement of the circulation pump is very simple without having to drain the system.



Technical data Ecomix pump group:

▸ Flow rate 1,600 l/h Max.
▸ Temperature 110 °C
▸ Max. pressure 6 bar
▸ Min. temperature 10 °C Kvs 8.3
▸ Ball valves Brass CW617N
▸ Material insulation EPP 38 g/l
▸ Thermal conductivity (λ 40”C) 0.038 W/mK
▸ Fire protection class ISO 3795
▸ EPDM sealing set
▸ Consumer connections 1”IG
▸ Connections system 1”½ AG

Technical data Wilo Para 25/6:

▸ Max. delivery height: 6m
▸ Max flow rate: 3.6m³/h
▸ Temperature range: -20°C to +110°C
▸ Power consumption: 3W-43W
▸ Operating pressure: max. 10 bar
▸ Electrical connection: 230V/50HZ

Technical data Esbe Ara 561:

▸ Running time 90°: 120 s
▸ Torque: 6 Nm
▸ Power consumption: 5 W
▸ Ambient temperature max: 55°C
▸ Protection class: IP 41
▸ Protection class: II

Scope of delivery:


▸ ECOMIX ENH001 heating circuit pump group with three-way mixer, ESBE ARA561 actuator and Wilo Para 25/6 high-efficiency pump
▸Distribution boom & hydraulic switch
▸Clima600 heating circuit control with sensor set

Manufacturer information:

ENVIRON Energie- und Umwelttechnik GmbH & Co. KG

Robert-Bosch-Straße 9

78048 Villingen-Schwenningen

Phone: +49 7705 977 5803

E- Mail: info@environgroup.de
Website: https://environ-solutions.de/