The Thermoreflux Electronically controlled with built-in three-way brass mixer. An ENC10 servomotor is installed. An Environ EcoStar 25/6 high-efficiency pump is also installed. In the upper area of the pump group there are flat-sealing shut-off valves (1" IT) with built-in thermometers (0-160°C).
The return flow increase (also return temperature increase or RLA) directs water from the warm flow of a heating system into the return. In this way, it reduces the temperature difference between the two media and thus ensures safe and efficient heating operation.
Technical data:
▸ Flow: 1,600 L/h
▸ Max. temperature: 110°C
▸ Max. pressure: 6 bar
▸ Min. temperature: 10°C
▸ Kvs: 8.3
▸ Ball valves: Brass CW617N
▸ Insulation material: EPP 38 g/l
▸ Thermal conductivity 0.038 W/mK
▸ Fire protection class: ISO 3795
▸ Seal set: EPDM
▸ Consumer connections: 1" IT
▸ Connections system: 1 1/2" male thread
Technical data Environ EcoStar 25/6 high-efficiency pump:
▸ Delivery height max: 6m
▸ Flow rate max: 3.6m³/h
▸ Temperature range: -20°C to +110°C
▸ Power consumption: 3W-43W
▸ Operating pressure: max. 10 bar
▸ El. connection: 230V/50HZ
▸ Supply voltage: 220~240V, 50/60Hz
▸ Protection level: IP44
▸ Insulation class: H
▸ EMC standard: EN61000-6-1 and EN61000-6-3
Technical data Environ ENC10 mixer motor:
▸ TFT display: Yes
▸ Keyboard: Yes
▸ Own consumption: Max. 3.5 W
▸ Energy consumption in standby mode: Max. 0.25 W
▸ Torque: 6 Nm
▸ Rotation angle: 90 < °
▸ Running time: 120 s 90 <°
▸ Mixing valve control: 3-point PID
▸ Mains voltage: 230 V~, 50 Hz
▸ Max. self-consumption: 5 W
▸ Protection class: IP42 according to 60529
▸ Protection class: I according to EN 60730-1
▸ Temperature sensor type: PT1000
▸ Housing material: PC - dark gray
▸ Product weight: 900g
