A+ Pyromax Pro Lambda 22 - 49 kW automatic wood gasifier complete package

Robin Wood Pyromax Pro Lambda 22 - 49 kW – Automatic wood gasifier complete package

The Robin Wood Pyromax Pro Lambda offers an efficient and environmentally friendly heating solution for residential and commercial properties. With its four power levels of 22 kW, 32 kW, 40 kW and 49 kW, it can be optimally adapted to different heat requirements. Thanks to the lambda-controlled combustion, this wood gasifier ensures optimized energy utilization and low emissions.

Main features of the Pyromax Pro Lambda

• Efficient combustion: optimal energy yield with minimal fuel consumption.
• Lambda control: Automatic adjustment for maximum heating output.
• High temperature combustion chamber: Maximizes heat generation.
• Large filling space: Allows the use of 60 cm long logs.
• Automatic ignition: convenient and time-saving operation.
• Precise combustion control: ensures constant heat output.
• Advanced hydraulic functions: heating circuit management and buffer loading.
• Temperature difference control: Efficient control of the heating output.
• Boiler inner wall protection: Increased durability through special protective devices.
• Speed-controlled induced draft fan: For optimized air supply.
• Easy-to-clean heat exchangers: Maintenance-friendly design.
• Precise air flow: clean and efficient combustion.
• Compact, modern design: space-saving and powerful.

Scope of delivery:

• Robin Wood A+ Pyromax Pro Lambda wood gasifier (power level selectable)
• Robin Wood buffer tank with thermal insulation (volume selectable)
• RWSFWM WLAN module for RW Smart Fire App
• RWPF buffer sensor
• buffer connection set
• Caleffi Boiler Safety Group
• Caleffi thermal drain safety device
• ENECO006ENC10ECOS256 Return flow increase with ENC10 and EcoStar 25/6 high-efficiency pump
• Reflex expansion vessel N140
• Afriso cap valve for expansion vessel

Technical data PyroMax Pro Lambda 22 kW:

• Nominal heat output: 22 kW
• Heating power range: 11-22 kW
• Boiler class EN 303-5:2021: 5
• Required chimney negative pressure: 12 Pa
• Water jacket capacity: 130 liters
• Flue gas temperature at nominal heat output: 165°C
• Exhaust gas temperature at minimum heating output: 100°C
• Minimum operating time at rated power (nominal Q): 3 hours
• Operating time at reduced power: 6 hours
• Minimum inlet water temperature (return temperature): 60°C
• Maximum water temperature: 90°C
• Type of fuel: natural, split logs with residual moisture 20%, according to standard 14964-5
• Moisture content of the fuel: max. 20%
• Length of firewood: 600mm
• Volume of wooden filling chamber: 120 liters
• Type of combustion chamber: negative pressure
• Required minimum volume of the buffer storage tank: according to EN 303-5:2021
• Supply voltage: 230V
• Frequency: 50 Hz
• Weight: 518 kg
• Maximum operating pressure: 3 bar
• Exhaust pipe - outer diameter: 150mm
• Energy efficiency class of the boiler: A+

Technical data PyroMax Pro Lambda 32 kW:

• Nominal heat output: 32 kW
• Heating power range: 16-32 kW
• Boiler class EN 303-5:2021: 5
• Required chimney negative pressure: 12 Pa
• Water jacket capacity: 140 liters
• Flue gas temperature at nominal heat output: 160°C
• Exhaust gas temperature at minimum heating output: 100°C
• Minimum operating time at rated power (nominal Q): 3 hours
• Operating time at reduced power: 6 hours
• Minimum inlet water temperature (return temperature): 60°C
• Maximum water temperature: 90°C
• Type of fuel: natural, split logs with residual moisture 20%, according to standard 14964-5
• Moisture content of the fuel: max. 20%
• Length of firewood: 600mm
• Volume of wooden filling chamber: 120 liters
• Type of combustion chamber: negative pressure
• Required minimum volume of the buffer storage tank: according to EN 303-5:2021
• Supply voltage: 230V
• Frequency: 50 Hz
• Weight: 539 kg
• Maximum operating pressure: 3 bar
• Exhaust pipe - outer diameter: 150mm
• Energy efficiency class of the boiler: A+

Technical data PyroMax Pro Lambda 40 kW:

• Nominal heat output: 40 kW
• Heating power range: 20-40 kW
• Boiler class EN 303-5:2021: 5
• Required chimney negative pressure: 12 Pa
• Water jacket capacity: 150 liters
• Flue gas temperature at nominal heat output: 160°C
• Exhaust gas temperature at minimum heating output: 100°C
• Minimum operating time at rated power (nominal Q): 3 hours
• Operating time at reduced power: 6 hours
• Minimum inlet water temperature (return temperature): 60°C
• Maximum water temperature: 90°C
• Type of fuel: natural, split logs with residual moisture 20%, according to standard 14964-5
• Moisture content of the fuel: max. 20%
• Length of firewood: 600mm
• Volume of wooden filling chamber: 120 liters
• Type of combustion chamber: negative pressure
• Required minimum volume of the buffer storage tank: according to EN 303-5:2021
• Supply voltage: 230V
• Frequency: 50 Hz
• Weight: 567 kg
• Maximum operating pressure: 3 bar
• Exhaust pipe - outer diameter: 150mm
• Energy efficiency class of the boiler: A+

Technical data PyroMax Pro Lambda 49 kW:

• Nominal heat output: 49 kW
• Heating output range: 25-49 kW
• Boiler class EN 303-5:2021: 5
• Required chimney negative pressure: 12 Pa
• Water jacket capacity: 163 liters
• Flue gas temperature at nominal heat output: 150°C
• Exhaust gas temperature at minimum heating output: 95°C
• Minimum operating time at rated power (nominal Q): 3 hours
• Operating time at reduced power: 6 hours
• Minimum inlet water temperature (return temperature): 60°C
• Maximum water temperature: 90°C
• Type of fuel: natural, split logs with residual moisture 20%, according to standard 14964-5
• Moisture content of the fuel: max. 20%
• Length of firewood: 600mm
• Volume of wooden filling chamber: 164 liters
• Type of combustion chamber: negative pressure
• Required minimum volume of the buffer storage tank: according to EN 303-5:2021
• Supply voltage: 230V
• Frequency: 50 Hz
• Weight: 620 kg
• Maximum operating pressure: 3 bar
• Exhaust pipe - outer diameter: 150mm
• Energy efficiency class of the boiler: A+

Experience the benefits of state-of-the-art wood gasification technology with the Robin Wood Pyromax Pro Lambda and invest in a sustainable and efficient heating solution.

Manufacturer information:

ROBIN WOOD GmbH

Überaucher Straße 9

D-78052 Villingen-Schwenningen

Tel.: +49 7705 9769692

Email: info@robinwood-gmbh.de

Website: www.robinwood-gmbh.de