The Clima600 is a weather-controlled heating controller for systems with a water-fired stove or wood boiler, buffer storage and mixed heating circuit. Weather-controlled Clima600 controllers are used to regulate the direct heating circuit, 1 or 2 mixer heating circuits, the heating of buffer storage or domestic water heating using boilers, water-fired stoves, solar panels and other energy sources.
In addition, an additional heat generator (e.g. NT boiler) can be requested via the Clima600. Select the appropriate system diagram from the following description. The individual parameters are set using the menu navigation. When the system is first started up, the mixer is set to "CLOSED". This is set automatically after the appropriate parameters have been entered. In the event of a power failure, the values are saved.
Important features of the Clima600
• Display of graphics and texts in the illuminated display
• Easy query of current measured values
• Extensive setting menus
• Menu lock to prevent accidental changes
scope of delivery
▸ Clima600 control
▸ Surface-mounted box
▸ Screws and dowels for a clean installation
▸ The sensor sets vary depending on the installation scheme that you can select above.
▸ All clamps are removable and very well made (handmade)
Operating instructions:https://environworld.environgroup.de/wp-content/uploads/2023/01/Clima600.pdf
Video tutorial: https://www.youtube.com/watch?v=YrqnjYRkDAY&ab_channel=ENVIRONSOLUTIONS
Get individual advice from our specialized customer support when setting up the controller.
If necessary, all values and parameters can be adapted to your system through our customer support and your help.
Manufacturer information:
ENVIRON Energie- und Umwelttechnik GmbH & Co. KG
Robert-Bosch-Straße 9
78048 Villingen-Schwenningen
Phone: +49 7705 977 5803
E- Mail: info@environgroup.de
Website: https://environ-solutions.de/