The ENVIRON ENC 10 is used to control the flow or return temperature of a system. About a
The keypad, which is located under the rotary knob, allows the values to be set to be programmed easily and intuitively. The color display shows you which settings you have to make and guides you step by step
through the necessary settings. It also shows you all ongoing actions and the set temperatures.
There is a very reliable servo motor installed inside that can drive three or four-way valves.
The ENVIRON ENC 10 comes with a pre-assembled connector and a temperature sensor with a connection set.
Application
▸ For controlling return temperatures (return temperature increase) in pellet boilers, wood boilers or others
Heat generator.
▸ For controlling flow temperatures in heating circuits with fixed temperature or in cooling systems.
Characteristics
▸ Choice between two preset hydraulic schemes
▸ Display temperature and other operating information
▸ Heating or cooling mode
▸ Temperature overview for the last week
▸ Display notifications and warnings about the operation of the heating system
▸ Circulation pump control
▸ Additional heat temperature sensor
▸ Selection of the direction of rotation of the mixing valve
▸ Setting the sensitivity of the controller
▸ Possibility of mounting on different valve types
▸ ENVIRON EASY CLICK - fastening system
▸ Automatic display alignment depending on the mounting position
Technical data Environ ENC10 mixer motor:
▸ TFT display: Yes
▸ Keyboard: Yes
▸ Own consumption: Max. 3.5 W
▸ Energy consumption in standby mode: Max. 0.25 W
▸ Torque: 6 Nm
▸ Rotation angle: 90 < °
▸ Running time: 120 s 90 < °
▸ Mixing valve control: 3-point PID
▸ Mains voltage: 230 V~, 50 Hz
▸ Max. self-consumption: 5 W
▸ Protection class: IP42 according to 60529
▸ Protection class: I according to EN 60730-1
▸ Temperature sensor type: PT1000
▸ Housing material: PC - dark gray
▸ Product weight: 900g
