Environ pellet suction system configuration 1 - pellet removal vertically with the Environ Spiderhug:
✓ Ready-to-connect pellet suction system ✓
Scope of delivery:
- Vertical removal unit SPIDERWUG
- Suction turbine with integrated filter system and dust container LOADER 700
- Environ Control Panel Drive
- Dosing unit dispenser with integrated sensor
- 20 m Environ PU pellet hose Ø 50 mm
EN3400.00.04 Environ Spiderhug:
The Spiderhug motorised vertical extraction unit is designed and built to extract fuel from the flat Environ storage containers: the fuel is sucked out from above.
The Spiderhug is placed on the surface of the stored pellets and during operation gradually draws the fuel down to the bottom of the store. The Spiderhug is equipped with a control board that protects the system against overvoltage and short circuits.
The Spiderhug is also suitable for use with self-built tanks of any kind. The Spiderhug works automatically via the electrical connection to the Environ Control Panel DRIVE.
Technical data Environ Spiderhug:
▸Power connection: 230V
▸Frequency: 50 Hz
▸Protection level: IP40
▸Rated power: 15W
▸Absorption: 0.14A
▸Revolutions per minute: 12 rpm
▸Nominal torque: 5Nm
EN1000.50.01 Suction turbine LOADER700:
✓The Environ LOADER700 is a central, powerful suction turbine for pellets and other granular fuels.
✓The suction system is suitable for single-pipe fuel systems with free air outlet.
✓The cable connections are on the right side. The dust container is made of high-strength transparent plastic.
✓Thanks to its single-phase electric motor with brushes and direct cooling, the ENVIRON LOADER 700 has a high suction power. Despite this high suction power, the ENVIORN LOADER 700 is particularly quiet.
✓The class E11 polyester filter offers a large filter area and can be washed with water.
Characteristics:
▸The Environ LOADER700 is universal.
▸It can be installed on all existing or newly installed boilers.
▸The dimensions are reduced to a minimum.
▸ The connection between the dosing unit and the central vacuum unit is eliminated as it is integrated into a single body.
The ENVIRON LOADER700 has the quality, performance and reliability of all Environ products.
Technical data suction turbine LOADER700:
▸Dust inlet: Ø mm 50
▸Air outlet: Ø mm 50
▸Protection level: IP44
▸Power supply: 230 V
▸Frequency: 50/60 Hz
▸Engine power: 1.3 kW
▸Consumption: 5.4 A
▸Maximum air flow: 234 m3/h
▸Filter surface: 6700 cm2
▸Container capacity: 18l
▸Filtration class: E11
▸Air silencer: Yes
Manufacturer information:
ENVIRON Energie- und Umwelttechnik GmbH & Co. KG
Robert-Bosch-Straße 9
78048 Villingen-Schwenningen
Phone: +49 7705 977 5803
E- Mail: info@environgroup.de
Website: https://environ-solutions.de/
